Precision Agriculture Equipment Technician

  • Credits: 60
  • Degree Type: A.A.S.
  • Campus: Thief River Falls

Supplies & Tools

1st Year Tool List

1- 1/4" dr Standard/shallow 12pt socket set 3/16" to 9/16" with ratchet & holder
2- 1/4" dr Extensions 2" and 4" in length
1- 1/4" dr Metric 12 pt socket set 5.5mm to 14mm with holder
1- 3/8" dr Standard/shallow 12 pt socket set, with holder for sockets 3/8" to 7/8"
1- 3/8"dr Metric 12 pt Deep Well socket set 8mm to 19mm with holder
1- 3/8" dr 12 pt Deep Well socket set 1/4" to 15/16"
1- 3/8" dr Ratchet with minimum 10" handle
2- 3/8" dr Extensions 6" and 10" in length
1- 3/8" dr Universal joint
2- 3/8" dr Sparkplug Socket 5/8" and 13/16"
6- Socket Drive Adapters: 1/4" to 3/8", 3/8" to 1/4", 3/8" to 1/2", 1/2" to 3/8", 1/2" to 3/4", 3/4" to 1/2"
1- 1/2" dr Standard/shallow 12 pt socket set, 3/8" to 1 1/4"
1- 1/2" dr Ratchet minimum 15" handle in length
2- 1/2" dr Extensions 5" and 10"
1- 1/2" dr Breaker Bar minimum 18" in length
3- Torque Wrenches 1/4", 3/8" 1/2" drives
1- Standard Length Combination Wrench set: 1/4" to 1 1/4"
1- Metric Standard Length Combination Wrench set: 6mm to 19mm
1- Approx. 48oz Dead Blow hammer
1- 12oz Ball Peen hammer
1- 30 oz Cross Peen hammer
1- Heavy Duty Diagonal Cutting Pliers: 7" to 8" in length
1- Heavy Duty 410G style Channel Locking Pliers
1- Heavy Duty Channel Lock Pliers: minimum 16" in length
1- Needle Nose Pliers: 7" with 2" jaw and cutter blade
1- Combination Pliers- minimum 8" in length
1- 4 Piece Vise Grip Pliers set
1- Solid Carbon Scraper- Nonflexible blade
1- Angle Head Blade Feeler Gauge Set .006" to .030"
1- Straight Blade Feeler Gauge Set .0015" to .035"
1- 12" Hacksaw with blade
1- Chisel Set: 5-6 piece set MUST include 1 Round Nose Cape Chisel with 5/16" blade
1- Punch Set: 5-6 piece set MUST include 1 center punch
1- Brass Drift- Minimum 8" in length and 1/2" Diameter
1- 8-10 piece screwdrivers set: Flat tip and Phillips head
2- Pocket Screwdrivers: 1 Flat and 1 Phillips
1- Straight or taper bit flute screw extractor set
1- 10 to 12 piece Torx bit driver set (approx T8 through T55)
1- 3/8" drive Hex Driver set (1/8" to 3/8" bits)
1- 10-15 piece Allen Wrench set (L shaped)
1- 10-15 piece metric Allen Wrench set (L shaped)
1- Round Face Mirror, extendable (minimum 2" diameter)
1- 3 piece Rolling Head Pry bar set from 12" to 20" in length
1- 3-4 piece angle tip prybar set
1- Drill Set: 1/16" to 1/2" by 32nds, in case
1- 12-24 volt test light
1- Continuity tester- MULTIMETER-
1- Hand Wire Brush- approx. 14" in length
1- OSHA Approved rubber tipped blow gun
1- 16 foot tape measure
1- 12" Adjustable Crescent Wrench
1- Wire Stripping, Cutting and Crimping Pliers (Must strip and crimp 10-18 gauge wire)
1- Magnetic Base Dial Indicator: .001" increments- 2" Face
1- Heavy Duty 2 D Cell Flashlight with batteries
1- Top Post Battery Terminal Cleaner (cutter style)
1- Telescoping Magnet (Large size)
1- Small Telescoping/ flexible pocket magnet
1- Retractable Utility Knife with extra blades
1- 4 piece pick set
1- 8" flat file with handle
1- Triangle file with handle
1- Standard tubing cutter
1- Tool Bag (approx. 16" in length)
1- Around the neck ear plugs
1- snap ring pliers set
1- Caliper-

1- Rollaway Tool Box