Accessibility:

Aviation Maintenance Technology

  • Credits
    100
  • Degree Type
    A.A.S.
  • Campus Location
    TRF
  • No Laptop RequiredLaptop NOT Required

Supplies & Tools

1-Calculator
1-Pocket Knife (under 3” blade)
1-Safety glasses or goggles *(1)
1-Straight Edge-Engineer’s scale (6” or 12”)
1-Pair rubber gloves
1-6” Pocket ruler
1-Combination square
1-Flashlight and batteries
1-Tool box with lock (Approx.24”long X 12” high X 12” wide)
1-3/8” drive socket set and ratchet (12 pt) (3/8” thru 7/8” deep)
1-3/8” drive 3” extension
1-3/8” drive 6” extension
1-3/8” drive 8” extension
1-1/2” to 3/8” drive adapter
1-7/8 deep thin wall socket ½” drive (spark plug)
1-1/4” drive socket set (12 point)
1-8” common screwdriver
1-6” common screwdriver
1-Stubby common screwdriver
1-8” #2 Phillip’s screwdriver
1-6” #2 Phillip’s screwdriver
1-Stubby #2 Phillip’s screwdriver
1-Stubby #1 Phillip’s screwdriver
1-Set of Box open-end wrenches (1/4” thru 1”, which must include an 11/32” wrench)
1-6: or 8” Visegrip pliers
1-8” channel lock pliers
1-Duckbill pliers
1-Needle nose pliers
1-Diagnal pliers
1-6” slip joint pliers
1-Snap ring pliers set
1-Wire stripper/crimpers
1-Hammer, Ball peen (8 oz.)
1-Mallet, Rawhide or plastic
1-Allen wrench set 1/16” thru 5/16”
1-Hacksaw and blades (32 teeth per inch)
1-File card (cleaning brush)
1-8” mill file
1-8” round bastard file
1-8” ½ round bastard file
3-File handles
1-Punch and chisel set
1-Awl
2-#40 drill bit
2-#30 drill bit
2-#21 drill bit
2-#11 drill bit
1-Automatic center punch
1-AN 470-3 Rivet set *(2)
1-AN 470-4 Rivet set *(2)
1-AN 470-5 Rivet set *(2)
1-Feeler gauge (flat and round)
1-Magnet
1-Inspection mirror
1-Mechanical fingers
1-Spray paint filter mask *(1)
1-Gas welding goggles
1-Valve Core Extractor
1-Digital Multimeter
1-Gasket scraper
1-Safety wire pliers
1-Blo gun & air chuck for tires
2-Type L quick couplers
1-Box Latex gloves
1-Dial or digital caliper
1-Fine tip felt marker
1-Inexpensive digital VOM
1-Snap ring pliers internal & external
Hearing Protection

Optional:
1-Swivel sockets ¼” & 3/8” drive
1 set angle wrenches
1 set crows feet
2 magnetic tip reg. and stubby (instead of screwdriver set)

*(1) Must meet State and Federal standards
*(2) May be purchased through the NCTC Bookstore